Whatsapp:+86 17852301313 Email:tinghe.lv@yimaotomg999.com

Tag Drip System Design

Drip Irrigation, Installation Guides, Product Comparisons

Inline Drip vs Punch-In Emitters: The Labor Math That Changes Everything

Inline Drip vs Punch-In Emitters: The Labor Math That Changes Everything If you’ve spent an afternoon bent over a roll of blank tubing with a punch tool in one hand and a bag of emitters in the other, you already…

admin
June 29, 2026

Drip Irrigation, Product Comparisons

Pressure-Compensating vs Non-PC Drip Emitters: When the Extra Cost Is Worth It (and When It’s Not)

What a Pressure-Compensating Emitter Actually Does A standard drip emitter works fine at a specific pressure, usually around 1.0 bar. Push 1.0 bar through a 2 L/h non-PC emitter and you get roughly 2 liters per hour. Nothing complicated. But…

admin
June 29, 2026

Farming Guides, Installation Guides

Drip Irrigation on Sloped Land: Pressure, Spacing, and Setup That Actually Works

I’ve watched farmers put the same drip system on flat ground and on a slope, expecting the same results. They don’t get them. Water pools at the bottom. Plants at the top of the hill look stressed. Nobody told them…

admin
June 27, 2026